Windows 10 Feature Pack Deployment - Windows 10 version 21H2 November 2021 update

1. Before deployment, run through the Compatibility Check available towards the end of the page, to find if you meet all the minimum requirements that impact upgradeability.
2. Ensure that feature pack option is enabled under Patch database settings.
   In Endpoint Central: Patch Mgmt -> Settings -> Patch Database Settings -> click on the Windows tab and enable the Feature Pack option.
   In Patch Manager Plus: Admin -> Settings -> Patch Database Settings -> click on the Windows tab and enable the Feature Pack option.
3. Ensure that you have not declined the feature pack updates under decline patches section.

Follow the steps below to download the ISO image:

1. Download Windows 10 21H2 ISO file from the Volume Licensing Service Center or by referring to this page.
2. If you're using Patch Manager Plus builds 10.1.2282.6 and above:
   • Method 1:
     • Click on Upload near the Download failed error message
     • In the pop-up window, browse and select the file to upload
     • Choose between the Checksum types (MD5 and SHA256)
       
       
     • Enter the checksum and wait for it to be validated
     • Once validated, click on Upload
     • Once the patch has been uploaded, it can be installed
   • Method 2:
     • Navigate to Patches -> Downloaded Patches and search for the necessary patches
     • Click on Upload (under Action)
     • Once the upload windows pops-up, follow the steps mentioned above, to upload the patches
3. If you're using Endpoint Central builds 10.1.2282.6 and above:
   • Method 1:
     • Click on Upload near the Download failed error message
     • In the pop-up window, browse and select the file to upload
     • Choose between the Checksum types (MD5 and SHA256)
       
       
     • Enter the checksum and wait for it to be validated
     • Once validated, click on Upload
     • Once the patch has been uploaded, it can be installed
   • Method 2:
     • Navigate to Patch Mgmt -> Downloaded Patches and search for the necessary patches
     • Click on Upload (under Action)
     • Once the upload windows pops-up, follow the steps mentioned above, to upload the patches

If you're using PMP Build Version below 10.1.2228.6 and DC Build Version below 10.1.2228.6:

1. Download Windows 10 21H2 ISO file from Volume Licensing Service Center.
2. Navigate to the patch store: To find patch store location in Endpoint Central, navigate to Patch Management -> Downloaded Patches -> Settings -> Patch Repository Location
3. To find the patch store in Patch Manager Plus, navigate to Patches -> Downloaded Patches -> Settings -> Patch Repository Location
4. To find the patch store in Vulnerability Manager Plus, navigate to Patches -> Downloaded Patches -> Settings -> Patch Repository Location
5. Copy the downloaded ISO file manually into the patch store directory, and rename the ISO file as given below:

Language-English:

• 32 bit: 109107-Win10_21H2_en_enterprisex32.iso
• 64 bit: 109103-Win10_21H2_en_enterprisex64.iso

The above naming convention is applicable only for Windows 10 21H2 Enterprise edition.

Endpoint Central, Patch Manager Plus, and Vulnerability Manager Plus supports the deployment of feature packs for multiple languages. Click here to view the ISO setup file for the language of your choice.

Note - To deploy Win 10 feature packs in more than one language, check the respective ISO files for each language, download and place them in the patch store.

Follow the steps below to download the ISO image:

1. Download Windows 10 21H2 ISO file from the Volume Licensing Service Center or by referring to this page.
2. If you're using Patch Manager Plus builds 10.1.2282.6 and above:
   • Method 1:
     • Click on Uploadnear the Download failed error message
     • In the pop-up window, browse and select the file to upload
     • Choose between the Checksum types (MD5 and SHA256)
       
       
     • Enter the checksum and wait for it to be validated
     • Once validated, click on Upload
     • Once the patch has been uploaded, it can be installed
   • Method 2:
     • Navigate to Patches -> Downloaded Patches and search for the necessary patches
     • Click on Upload (under Action)
     • Once the upload windows pops-up, follow the steps mentioned above, to upload the patches
3. If you're using Endpoint Central builds 10.1.2282.6 and above:
   • Method 1:
     • Click on Upload near the Download failed error message
     • In the pop-up window, browse and select the file to upload
     • Choose between the Checksum types (MD5 and SHA256)
       
       
     • Enter the checksum and wait for it to be validated
     • Once validated, click on Upload
     • Once the patch has been uploaded, it can be installed
   • Method 2:
     • Navigate to Patch Mgmt -> Downloaded Patches and search for the necessary patches
     • Click on Upload (under Action)
     • Once the upload windows pops-up, follow the steps mentioned above, to upload the patches

If you're using Patch Manager Plus builds below 10.1.2282.6 and Endpoint Central builds below 10.1.2282.6:

1. Download Windows 10 21H2 ISO file from Volume Licensing Service Center or by referring to this page.
2. Navigate to the patch store: To find patch store location in Endpoint Central, navigate to Patch Management -> Downloaded Patches -> Settings -> Patch Repository Location
3. To find the patch store in Patch Manager Plus, navigate to Patches -> Downloaded Patches -> Settings -> Patch Repository Location
4. To find the patch store in Vulnerability Manager Plus, navigate to Patches -> Downloaded Patches -> Settings -> Patch Repository Location
5. Copy the downloaded ISO file manually into the patch store directory, and rename the ISO file as given below:

Language-English:

• 32 bit: 109105-Win10_21H2_enx32.iso
• 64 bit: 109101-Win10_21H2_enx64.iso

The above naming convention is applicable for all Windows 10 21H2 editions except the Enterprise edition.

Endpoint Central, Patch Manager Plus, and Vulnerability Manager Plus supports the deployment of feature packs for multiple languages. Click here to view the ISO setup file for the language of your choice.

Note - To deploy Win 10 feature packs in more than one language, check the respective ISO files for each language, download and place them in the patch store.

For users below Windows 10, version 2004,

1. In the server web console, navigate to Missing Patches view.
2. Choose the Windows 10 21H2 feature pack patches you wish to deploy.

Patch ID details:

• 109108 - Windows 10 21H2 Enterprise Edition - 32 Bit
• 109104 - Windows 10 21H2 Enterprise Edition - 64 Bit
• 109106 - Other Windows 10 21H2 Editions - 32 Bit
• 109102 - Other Windows 10 21H2 Editions - 64 Bit

For customers having windows 10 2004 / 20H2 / 21H1 versions deploy the below patches:
109113 - Feature Update Windows 10 21H2 via Enablement Package (2004/20H2/21H1 - 21H2) (x86)
109112 - Feature Update Windows 10 21H2 via Enablement Package (2004/20H2/21H1 - 21H2) (x64)

3. Click Install Patch to deploy them.

For users with Windows 10, version 2004 and above,

1. In the server web console, navigate to Patches > Missing Patches.
2. You can filter based on Patch Type - equal - Feature Packs.
3. Choose the feature updates you wish to deploy.
4. Click Install Patches to deploy them.



Enablement Package patch ID details:

Current version	Version to upgrade to	Patch IDs
Windows 10, version 2004 Windows 10, version 20H2 Windows 10, version 21H1	Windows 10, version 21H2	109112 (x64) 109113 (x86)

1. To create an APD task for deploying feature packs, make sure to select the feature pack check box while defining the patch task.
2. Once the dependency patch is downloaded and stored in the Patch Store, "Feature Packs" will be successfully deployed to the target computers during the subsequent deployment window. A separate configuration can be created for the particular patch on demand.